Frequently Asked Questions

Access_®, LiteRider_®, & Lorado Snapless Roll-up Tonneau Bed Covers 

Are the Access® Roll-up Cover & LiteRider® Lockable? The Access® and LiteRider® Roll-up Covers come with slide-locks. The optional tailgate lock is needed to lock the tailgate.

Can I adjust the tension of the Access® Cover or LiteRider®? Yes, the direct dial tension adjusters allow you to fine tune the cover tension with the turn of a dial. Giving you control over your cover tension, not the weather. No tools are needed. Plus there are no moving parts to fail or springs to corrode.

Can I install my Access® Cover or LiteRider®? Yes, the instructions are clear-cut. If you do need assistance, call 1-800-233-4655 between 9-5pm CST. Our customers overwhelmingly say "it was simple and easy to install".

Does the Access® or LiteRider® Roll-up Cover increase my gas mileage? With the Access® or LiteRider® in the closed position, your pickup's aerodynamics are improved, which results in increased mileage and handling.

How does the Access® Roll-up Cover or LiteRider® work? Simply release the auto-latch and roll the cover to the front of your pickup. The bars and bows are attached to the cover and roll up with it. Once the cover is rolled up to the back of the cab, secure it with the quick release straps. To close the cover, simply roll it back to the tailgate, over-center the roll-up/tensioning bar into the strikes and the auto-latch holds it securely in place. For additional security, push the slide-locks into place. Then, seal the sides with your hand.

How long will the cover material last? The life expectancy is determined by how well you take care of it. Both the Access® and LiteRider® Roll-Up Covers use the same heavy-duty, double coated vinyl. It is durable and proven flexible to -40 degrees. However, how you care for the double coated vinyl, will determine how long it will last. To shine and increase the longevity of your cover we suggest that you use PPC Formula 2 Cleaner / Protectant.

What is the Access® Limited Edition? The Access® Limited Edition is the Access® Roll-up Cover with all black bars, bows, and rails. For that Ultimate Custom Truck Look!

What is the difference between the Access® Roll-up Cover and the LiteRider®? Both covers offer the same great rollup style design. The LiteRider® is our standard model and the Access® Roll-up Cover is our premium model. The Access® Roll-up Cover comes with a thumb dial direct tension adjustment, super heavy duty cover, and 1 1/2" side sealing system. It is our best seller. The LiteRider® has thumb dial tension adjusters, a Heavy-Duty cover and a 1" side sealing system. The material is tougher and stronger than any other cover made. However the Access® Cover is even stronger. The Access® Roll-up Cover has been manufactured since 1988 and is "the proven truck cover that keeps working for you™.".

What size toolbox will the Access® Toolbox Edition work with? This cover will fit most 20"-21" over-the-rail style toolboxes and comes with all the features of the Access® Roll-up Cover. Each kit includes a sealing header bar adaptable for most 20"-21" over-the-rail toolboxes.

Why are the Access® & LiteRider® Roll-up Tonneau Covers the tightest made? For a few reasons: 1. Angled Roll-up Bar: The unique roll-up bar over-centers into the strikes, pulling the cover tight from front to rear. Giving you the tightest soft cover made. Plus the cover is wrapped around the anodized aluminum roll-up bar for better styling and a tight seal over the tailgate. 2. Adjustable Tension: The tension adjusters allow you to fine tune the cover tension with the turn of a dial. Giving you control over your cover tension, not the weather. No tools are needed. Just turn the dial to tighten your cover and feel good knowing you have the tightest cover made.

Will the Access® Cover or LiteRider® shrink in the cold or stretch in the heat? Our material is Flexible at 40 below & is stretch and shrink resistant. It is tested and proven in all four seasons.

Will the Access® Cover or LiteRider® work with 5th Wheels? Yes, simply roll up the cover to the front of your truck and secure it with the quick release straps..

Will the Access® Cover or LiteRider® work with other accessories? Special toolbox Access® Cover models are available for late model full size pickups. The Access® cover or LiteRider® have a Specially Engineered Slanted (angled) Rail Design delivering more function and style. It is accessory friendly - allowing plenty of room for bed rails, while still allowing you room to seal the cover. Easier Operation - The slanted design makes opening and closing the cover easier and longer lasting. The heavy-duty rails are durable and the sleek appearance contours to the design of the truck bed..

Will the Access® Roll-up Cover or LiteRider® keep my pickup bed dry? Our covers are waterproof and our rails come with a closed cell gasket attached to the sides. However, your tailgate is not sealed like your doors. We suggest that you purchase the optional TrailSeal® Tailgate Gasket for that. On some pickup models the stake pockets may need to be covered.

Videos

Opening cover from locked tailgate If you use the slide-locks and a tailgate lock then this is how you open the cover. Unlock tailgate, move slide-locks in, pull cord on auto-latch and roll cover towards the cab.

Closing and Securing Cover. To close, unbuckle the quick release straps and roll the cover towards the tailgate. Over-center the roll-up/tensioning bar into the strikes. The auto-latch automatically secures it. Seal the sides with the reliable hook & loop sealing system. Then push the slide-locks into place if you want to lock the cover with a tailgate lock.

SnowSport_®

How much does the plow weigh? The aluminum blade is about 110 lbs. The complete kit with blade, push frame, and hitch is about 225 lbs..

Is the SnowSport® available for my vehicle? It is available for most late model pickups and SUV's.

Can I move the SnowSport® from one vehicle to another? Yes, the plow can be easily transferred to another vehicle, all you need is a front receiver hitch.

How well does the rubber cutting edge and box ends hold up? The rubber cutting edge is 1" thick 6" high - made of a hard rubber compound. This has been tested and proven to provide years of service. It can be replaced relatively inexpensively.

What is the warranty? The plow has a 1-year limited warranty. See the owners' manual for details.

How can the SnowSport® Plow operate without hydraulics? The blade is secured by the push frame. As you push the snow, the blade travels up and down as needed by gravity. The rubber cutting edge is designed to cut through the snow but pass over the harder ground surfaces below and be gentle on grass. When you back up, the blade automatically lays back, skimming over the surface. Then you drive forward and the blade re-engages for plowing.

How do you switch from transporting to plowing or from plowing to transporting? The operator must manually unhook the plow and lower it for plowing. For transporting simply lift the blade, one side at a time, onto the push frame.!

How easy is the SnowSport® Plow to hook up or un-hook between jobs? It's very easy. Just insert the push frame into the front receiver hitch and secure with pin. Then hang the blade one end at a time onto the push frame (can be done in less than a minute). Unhooking is just as easy.

How is the SnowSport® Plow shipped? It is shipped via common carrier in three boxes. The plow box, push frame box, and receiver hitch box.

Can I install the SnowSport® Plow myself? YES, the instructions are clear cut. If you do need assistance, call 1-800-233-4655 between 9-5pm CST. Our customers overwhelmingly say "it was simple and easy to install". The front hitch varies from vehicle to vehicle. Plan about 30 minutes to 1 hour depending on your level of experience. The plow is attached in minutes by plugging in the push frame and attaching the plow to it.

Is a front receiver hitch needed? Yes, and it comes with the plow package along with instructions to install it.

How difficult is it to install the hitch and plow? The front end hitches are designed to bolt in place on most models - occasionally, certain models may require drilling. The instructions are clear cut. The front receiver hitch is mounted to the vehicle and the push frame is plugged into the front receiver hitch. The plow simply hangs on the push frame.

How does the SnowSport® Install to my vehicle? The SnowSport® utility plow hooks up to the front receiver (2" square tube) hitch, just like hooking up a receiver on a hitch used at the rear of a vehicle for towing trailers.

Can you show me how to install the SnowSport®?   SnowSport®: Easy Installation 1. Each kit comes with a mount kit (front receiver hitch), push frame, and plow blade.   2. Mount the front receiver hitch to the front of the vehicle. Each mount kit is vehicle specific. 3. Installation takes between 30 minutes and 1 hour depending on your technical skill and the specific front hitch. 4. Slide the push frame into the front receiver hitch.   5. Secure the push frame with the hitch pin.   6. Once you have secured the push frame you are ready to attach the SnowSport® Plow.   7. Simply lift one end of the blade at a time onto the holders and secure with snap pins.   8. You're done! This installation guide is only for SnowSport® utility plows with serial numbers 5372 and higher. If you purchased a SnowSport® with a smaller serial number and have questions please contact us for additional information that may be available for your specific truck model.   SnowSport® Operators Guide [.pdf - 108k]

Videos